PV*SOL

To whom it may concern, Is there any option to automate the data input process in PV*SOL in the program or with help of Python? Best regards, Faruk

Hi, i want to know, how can change the energy to the grid and the comsuption in the Energy flow Graph. instance, just let 80% to comsuption and then 20% to the grid or any option to set up. thanks

Hi there, I've run into an issue with creating a load profile from measured values. The measured values are half hourly data, kWh, every day, year round, starting from 1st Jan until 31st Dec 2020. The year is a leap year. The HHD data is 17,568 values, PVSol expects the file to import 17,568 values, though after import is successful only 17,520 values are realised. As such, the total annual energy requirement value in PVSol is less than expected. How can this issue be solved please? Thank you in advance! Yours, Jordan HDD.csv

Dear Team Valentin Software, Are there any newer Meteonorm data for PV*Sol ? Is there an option to import actual/current climate data with meteonorm for period from 1991 to 2020? Whether the data in the PV*Sol premium is updated? Thank you in advance! Kind regards, Marta

Hello. I am working on a project that I created with panels facing in different directions. I can't render the strings as I want with the power optimizer. I want the single string I'm creating to be evenly distributed on both sides. Is it possible? Thank you in advance for your help.

To whom it may concern, How to import custom weather data(for example: per hour)and in which form it should be in? Best regards, Faruk

To whom it may concern, In output file(csv or excel) there are few irradiance values: Irradiance onto horizontal plane, Diffuse Irradiation onto Horizontal Plane, Global radiation - horizontal, Deviation from standard spectrum, Ground Reflection (Albedo), Global Radiation at the Module. Which one of these are GHI(global horizontal irradiance), DHI(diffuse horizontal irradiance), DNI(direct normal irradiance)? One more question. Does PV*SOL enable calculations of energy yield for short periods(week or weeks) and if i does, how to do it? Best regards, Faruk

Hello everyone, I am having issues with the "Results per Module Area" part in the Presentation simply not having any content in it. Just a blank space till the end of page, next page starts with the next headline (see screenshot attached). I've tried to turn it of an on in the content settings, but still it does not fill in. Any fixes for this problem? Premium 2020 R4. Thanks, Frido

Hi, Is it temporary that ABB inverters are gone from the database? /Douglas

In DC cabling, does the calculated distance include the connection between the string of panels or is it only from the last point to the inverter?

Hello i am making a simulation with with a hybrid inverter battery system . The hybrid inverter i am using is SMILE T-10 from Alpha ESS . When I make the inverter configuration i am also supposed to specify the same as the battery system where as the inverter is supposed to act as a battery system since it is hybrid. When i chose the battery system i have to opt for 4 of hese bateries, where as ideally its just supposed to be one whole unit for a battery and an inverter. any help would be appreciated. athnkyou Yash Bhosale

Who can help me solve this question. See appendix for details. Case.xlsx

Hey! I have some question about how to connect all parts of system in case of using Ferroamp components. Lets say: 20 strings with 18 panels each 20 SSO 8kW (1string/SSO) EnergyHub XL Cabinet 112kW (build from 4x28kW) Also I should use DC cabinets between SSO and Energy Hub. When I tried to connect I couldn't get correct results. Probably I am making some mistake that I can't see. Hope to hear from you soon, Anna

Is there anywhere where I can find a report/whitepaper explaining the methodologies and assumptions (including availability and losses) used to arrive at the P50 yield estimates in PVSol?

Hello, Can you please explain the difference between the rotational axis incline and rotational angle opening?

I tried to add 3d module but I got this message below. so could anyone give the solution for it? Thanks in advance.

Hello! I tried to update to 2021 R6 an got the error "An error occurred while trying to replace the existing file: DeleteFile failed; code 5." See screenshot. Is it fine to ignore and skip? Thanks, Frido

Hello, I have encountered a problem with the consumption results for one of our sites and I was wondering if you could help please. First I had a 300kw system with these details: PV Generator Output 300.1 kWp Spec. Annual Yield 839.66 kWh/kWp Performance Ratio (PR) 88.0 % Yield Reduction due to Shading 0.8 %/Year …

Hello dear developers, I want to add my climate data for which i have exactly made the .dat file according ro the given format by PV*SOL. But the moment i add the data, it says Conversion failed. I would sincerely look forward for some help kefergasse.dat

How can I add SOLAREDGE panels to PV SOL?

Hello Team, i am planning use minimum number of Inverter for my large solarpark (0,5 MW) which has around 1056 Solar panel. how should i set the string and series so i can use minimum number of inverter(5 to 7). i tried with SMA,Sungrow,huawei invters but it take 40 inverters for this project. i got a suggest configuration of IBC Solar AG inveter but it also take 27 inveter. can you please help me to find solution that how can i set a strings?.

hy when i open any project, pvsol shows that its loading profile but it does not open

Hello, Is it even possible to connect only one Tigo optimizer per string? I tried to do that with no result .. It looks like it only service the matrix of optimizers for each module?? regards, Andrzej

Hi, I would like to know if it is possible to see on which PV panel is the optimizer on, since I only need one optimizer.