unknown1990 Posted November 3, 2020 Report Posted November 3, 2020 Hi everyonee, has anyone managed to design off grid system using pvsol. I just cant choose right battery inverter and battery system. Is there any tutorial or webinar about offgrid pvsol systems. I hand calculated all what I need, but i just cant simulate or choose desired configuration. In the attachment you can see the tab that is bothering me. Thanks in advance Quote
developer_mh Posted November 4, 2020 Report Posted November 4, 2020 Hello, can you clarify what the problem is? Are you not able to choose a battery inverter and batteries or do you get simulation errors afterwards? If possible, send us your project (by private message here in the forum), so we can have a look. Kind regards, Martin Quote
unknown1990 Posted November 4, 2020 Author Report Posted November 4, 2020 Hi, I got simulation error afterwards. I cant choose correct inverter and batteries and therefore I cant simulate it. Here is what I calculated: i need 6 330W panels. battery capacity should be bigger than 250mAh with DoD 50% i need two days of autonomy in the summer daily consumption is 12kWh irradiation is 1528 kWh/m2. I will send you project privately. Thanks Quote
developer_mh Posted November 6, 2020 Report Posted November 6, 2020 Hi, thank you for sending the project. The problem here is that in winter the consumption is way too high compared to the PV production. In January for example you have a consumption of around 250 kWh, but the PV production is only around 70 kWh. This won't work. In order to be able to simulate and see how much consumption you can cover in which month, just set the check box for "Load Shedding" below the list of appliances: Then you'll be able to simulate and see the results. The loads will always be switched off when there is not enough PV power. Hope that helps, kind regards, Martin Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.