Off-grid system with battery

[José Cabrera Escobar]

I have an off-grid system with a battery. This battery doesn't require its own inverter; it uses the main inverter. How can I design this in the software? The problem is that the software requires a battery with its own inverter, which isn't my case. I want to model a system with a Goodwe GW5K-ES-LD-G10 inverter and a Goodwe LX A5.0/30 battery.

[José Cabrera Escobar]

Dear Valentin Software

 

I would like to carry out a simulation with a Goodwe GW5K-ES-LD-G10 inverter, but when selecting the battery, it asks me to choose a battery inverter and a battery, as shown in the figure..

 

 

 

I am using the Goodwe LX A5.0-30 Series battery, which does not require a battery inverter and connects directly to the main inverter, the Goodwe GW5K-ES-LD-G10. How should the configuration be carried out in this case?

Regards

 

José Cabrera

UNIVERSIDAD TÉCNICA DE AMBATO

[hotline_oh]

Dear José Cabrera,

Thank you for your inquiry.

We recommend that you plan your stand-alone system as if it were a grid-connected system, as described in our FAQ: How do I plan a stand-alone system?

 

 

 

[José Cabrera Escobar]

Dear Valentin Software

I have used the proposed system.

But when selecting the battery, it still asks me to choose a battery inverter and the battery. In my case, my system does not require a separate battery inverter; it operates with the main inverter.

Best regards,

 

José Cabrera