March 9, 20233 yr comment_12781 How are the losses due to ageing of the modules taken into account in the simulation please ? Report
March 10, 20233 yr comment_12792 Hi Alain, the module ageing losses (=degradation) are taken into account in the economic calculation only. The energy yield simulation is conducted for the first year only, without module ageing losses. You can refer to the energy balance after the simulation in order to see which losses are accounted for: https://help.valentin-software.com/pvsol/en/pages/results/energy-balance/ Hope that helps, kind regards, Martin Report
March 10, 20233 yr Author comment_12798 Thank you Martin. I would like to know the degradation loss percentage considered every year by the software and if this is a value that can be edited by the user, please. Report
March 10, 20233 yr comment_12799 Hi Alain, yes, the module degradation can be edited by the user: https://help.valentin-software.com/pvsol/en/pages/pv-modules/module-degradation/ Kind regards, Martin Report
March 10, 20233 yr Author comment_12800 There is no PV Modules menu in my model with a 3D design. How to reach these parameters in this case please ? Report
March 13, 20233 yr comment_12890 Hi Alain, if you have a 3d project, the module degradation is accessible here: Kind regards, Martin Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.