CarlSEL

Perfect, thank you

So for example this?

Hi, When stringing is there a process after choosing meander? Most of the time when meander is chosen and then cable design. It automatically keeps the stringing as simple. Am i missing a step? Thanks

Hi, would it be possible to develop roof-spanning wiring , polystring wiring including elevated systems. So a manual string can be completed using the pen. Thanks

Hi, When I follow your video, the pencil is not available. I am using a Solaredge inverter too.

Hi, I am still awaiting a response to my last post. Thanks

Hi, Thank you for your quick response. The PV Module used is the DM510G12RT-B54HBT. I have attached the datasheet. I was supplied the .pan file by the manufacturer and it matches the datasheet as you can see below. So, am I right in saying that 24no of these modules at -10 degrees will have a string voltage of approx 1060 V DC? Thanks DMEGC 510W.pdf

Hi, The Sungrow 150k Inverter states a maximum DC Input of 1100V. When using DMEGC 510W PV mods we have been given string lengths of 24 by PVSol on our reports. Sungrow have now told us that the maximum length of PV mods for this invert is actually 22 modules at -10 degrees. The Voc of the modules at -10 degrees is 44.45V. so 44.45 x 24 = 1066.8V Is this getting through to the report due to Sungrow inputting the incorrect Max DC V? Thanks

Hi, Has the auto configuration been removed from the software when designing with Solar Edge inverters. Mine constantly says no configuration can be found. Thanks

Hi, Can you please explain to me where the IAM is calculated within the losses with regards to PV modules? Also, what values are used in these calcs? I would expect to see different values over different angles? The panel I am interested in is the Trina-510-NEG18R.28 VERTEX S+ 2024 Thanks

Thank You

Hi, I have noticed that when a certain amount of inverters are used the Performance ratio per inverter graph only gives one value. Is there a way of getting each individual PR ration per inverter for a site using 12no 40kW inverters? Thanks Carl

I was asking about the AC cables. I have 25 330k inverters all with different lengths ranging from 100 metres to 300 metres. There is no way to manually input each cable length.

Has this feature been added yet? A separate loss for each cable length would be so beneficial.

Thank, I have just sent an email.