Techsie Posted February 12, 2020 Report Posted February 12, 2020 Dear Developer Team After reviewing your software I encounter following problem: The PV-Generator is charging the batterie 48 V with a DC-Charge-Controller, that includes an MPPT-Tracker. On the same DC-Bus lies an Inverter for 230V(AC)-1-Phase, connected to the house system - in such a way, that there is no feeding into the external power-grid. This is a quite sensible and surely not seldomly used constellation for OFF-grid and ON-grid systems to reduce inverter losses by canging forth and back from DC to AC again to DC to be followed to AC. Studer/Steca or Victron for example are offering such hardware. How do I implement such a constellation with your software PVSol? Best Regards Quote
Techsie Posted February 12, 2020 Author Report Posted February 12, 2020 One further problem evolved. I hope I only missed the way to solve it: How can I connect 2 or more charger units/inverters to one battery block? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.