Keith

Hi all, Hoping someone can clear this up for me. I came across the Livoltek Hyper-5000 inverter in PVSOL. However, I noticed the PV panels where easily exceeding the Current of the inverter. I notice that the Input current & Short circuit current values (in the 'Electrical data- DC' section) are the same as the values on the MPP inputs ('MPP Tracker' section). However, should it not be the case that for the current values in the 'Electrical data - DC' section, the MPP current values are multiplied by the number of MPP trackers (in this case 2, as there are 2 inputs on this inverter). Thus, this would make the Input current & Short circuit current values in the 'Electrical data - DC' section higher values, therefore the inverter can take higher levels of current. I have attached screen shots which may help. Regards, K

Hi Frederik, Yes. On the report it gives the Month on Month generation/yield. But was wondering if it can be shown in 30min intervals, but ok not to worry. In terms of the hourly and minute interval yield data - I can see the Hourly Excel export on the bottom left of the screen, that fine. (I cannot see a Minute Excel export though?) But is it possible to add either the hourly or minute interval yield data to the actual PVSOL Report? I can see in the simulation options the tick boxes for hourly and minute (screen shot attached), but they are not on the PVSOL report? Thanks, K

Hi all, Is it possible in PVSOL to produce half hour generation profile's? Thanks, K

Hi, Is it possible to export inverter data as a OND file? K