Jump to content

Wrong amount of PV Generator Energy (AC grid)


Recommended Posts

Hello Valentin Team,

I`ve created  3D  project with bifacial  modules (east/west)  

I don`t know if i do something wrong or there is a problem in aplication but in "Calculation": PV Generator Energy (AC grid) probably calculates energy only for one side.

I`v done some tests and facade  configuration heading to west producing  the same amount of energy as bifacial setup heading to east/west.

Calculation works correctly in 2D.

 

Bifacial and facade projects included in attachment.

kWh2.thumb.png.5ac637d601a9f1ea3d27715397080bc6.png

 

Niemierzyno_1.pvprj Niemierzyno_1_proba_usun.pvprj Niemierzyno2d.pdf

Link to post
Share on other sites

Hi Marcin,

in the 3D environment of PV*SOL, we decided not to calculate bifacial gains if we have east/west mounting structures like in your pictures on the left. We assume that there is no irradiance hitting the backside of the module, since the triangular space below the modules will be dark.

Also for facade structures, we decided not to calculate bifacial gains, since we considered them to be usually parallel to a vertical wall. But we just discussed it here and we will modify that in the future. Mounting structures of type 1 ("Tilting of modules") and type 3 ("Facade tilt") will calculated with the view factor bifacial model for inclination angles between 10° and 80°, and with the "vertical" model for angles between 80° and 90°. If the inclination angle is below 10°, no irradiation gains will be calculated.

But for now, if you want to calculate with vertical modules oriented towards East/west, just use the mounting structure type 1.

Kind regards,

Martin

Link to post
Share on other sites

Thank you Martin for reply,

 

To clarify situation here. Right now i can`t make bifacial installation like on picture with title "Bifacial two sides" and  and proper Generator Energy calculated.

I can make it like on picture with title "Facade one side"  but this is not resolve my problem because i need installation with  90 degree mounting and modules on both sides.

Is there any workaround for now  to achive this ?

 

Regards

Link to post
Share on other sites

Hi Marcin,

from what I see on the picture there and also on their website (https://www.next2sun.de), there are only two bifacial modules per section, one on the top and one below. I think we can see it very clearly here on this picture:

K%C3%BChe-zwischen-den-Modulen.jpg

This system can be easily modelled in 3D right now, with the help of mounting system type 1:

image.png

image.png

And, in order to get the vertical posts in the correct place, set the Support Points Distance to a value a bit smaller than the longer side of the PV modules.

image.png

 

Hope that helps, kind regards,

Martin

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...